com.change_vision.jude.api.inf.editor
Interface ActivityDiagramEditor

com.change_vision.jude.api.inf.editor.ActivityDiagramEditor

All Superinterfaces:

BasicDiagramEditor, BehaviorDiagramEditor, DiagramEditor

All Implemented Interfaces:

BasicDiagramEditor, BehaviorDiagramEditor, DiagramEditor

public ActivityDiagramEditor
extends BehaviorDiagramEditor

Interface to create presentations in Activity Diagram.

Since:

6.8.0

Method Summary

abstract INodePresentation	createAcceptEventAction(String name, Point2D location) Create an Accept Event Action.
abstract INodePresentation	createAcceptTimeEventAction(String name, Point2D location) Create an Accept Time Event Action.
abstract INodePresentation	createAction(String name, Point2D location) Create an Action.
abstract IActivityDiagram	createActivityDiagram(INamedElement owner, String name) Crate an activity diagram in a parent package.
abstract INodePresentation	createActivityParameterNode(String name, IClass base, Point2D location) Create an Activity Parameter Node.
abstract INodePresentation	createCallBehaviorAction(String name, IActivityDiagram activity, Point2D location) Create a Call Behavior Action.
abstract INodePresentation	createConnector(String name, Point2D location) Create a Connector.
abstract INodePresentation	createDecisionMergeNode(INodePresentation parent, Point2D location) Create a decision Merge Node.
abstract ILinkPresentation	createDependency(String name, INodePresentation client, INodePresentation supplier) Create a Dependency.
abstract INodePresentation	createFinalNode(String name, Point2D location) Create a Final Node.
abstract ILinkPresentation	createFlow(INodePresentation source, INodePresentation target) Create a Control Flow.
abstract INodePresentation	createFlowFinalNode(String name, Point2D location) Create a Flow Final Node.
abstract INodePresentation	createForkNode(INodePresentation parent, Point2D location, double width, double height) Create a Fork Node.
abstract INodePresentation	createForkNode(INodePresentation parent, Point2D location) Create a Fork Node.
abstract INodePresentation	createInitialNode(String name, Point2D location) Create an Initial Node.
abstract INodePresentation	createJoinNode(INodePresentation parent, Point2D location, double width, double height) Create a Join Node.
abstract INodePresentation	createJoinNode(INodePresentation parent, Point2D location) Create a Join Node.
abstract INodePresentation	createObjectNode(String name, IClass base, Point2D location) Create an Object Node.
abstract INodePresentation	createPartition(INodePresentation superPartition, INodePresentation previousPartition, String name, boolean isHorizontal) Create a Partition.
abstract INodePresentation	createPin(String name, IClass base, boolean isInput, INodePresentation parentAction, Point2D location) Create a Pin in a Parent Presentation.
abstract INodePresentation	createProcess(String name, Point2D location) Create a Process.
abstract INodePresentation	createSendSignalAction(String name, Point2D location) Create a send Signal Action.

Methods inherited from class com.change_vision.jude.api.inf.editor.BasicDiagramEditor

createNote, createNoteAnchor, createNoteAnchor

Methods inherited from class com.change_vision.jude.api.inf.editor.DiagramEditor

createImage, createLine, createRect, createText, delete, deleteDiagram, deletePresentation, getDiagram, setDiagram

Method Detail

createActivityDiagram

abstract IActivityDiagram createActivityDiagram(INamedElement owner,
                                                String name)

Crate an activity diagram in a parent package. Diagram is set to DiagramEditor (DiagramEditor.setDiagram(IDiagram diagram)) if the diagram is created successfully.

Parameters:

owner - Parent Package

name - Activity Diagram Name

Returns:

Activity Diagram

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      ILLEGALMODELTYPE_ERROR_KEY - if the model type is illegal. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      INVALID_OWNER_KEY - if the owner is invalid. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createPartition

abstract INodePresentation createPartition(INodePresentation superPartition,
                                           INodePresentation previousPartition,
                                           String name,
                                           boolean isHorizontal)

Create a Partition.

Parameters:

superPartition - Super Partition

previousPartition - Previous Partition

name - Partition Name

isHorizontal - Horizontal Partition / Vertical Partition

Returns:

INodePresentation Partition

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createInitialNode

abstract INodePresentation createInitialNode(String name,
                                             Point2D location)

Create an Initial Node.

Parameters:

name - Initial Node Name

location - Location

Returns:

INodePresentation Initial State

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createFinalNode

abstract INodePresentation createFinalNode(String name,
                                           Point2D location)

Create a Final Node.

Parameters:

name - Final Node Name

location - Location

Returns:

INodePresentation Final State

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createAction

abstract INodePresentation createAction(String name,
                                        Point2D location)

Create an Action.

Parameters:

name - Action Name

location - Location

Returns:

INodePresentation Action

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createFlowFinalNode

abstract INodePresentation createFlowFinalNode(String name,
                                               Point2D location)

Create a Flow Final Node.

Parameters:

name - Flow Final Node Name

location - Location

Returns:

INodePresentation Flow Final Node

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createSendSignalAction

abstract INodePresentation createSendSignalAction(String name,
                                                  Point2D location)

Create a send Signal Action.

Parameters:

name - send Signal Action Name

location - Location

Returns:

INodePresentation send Signal Action

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createAcceptEventAction

abstract INodePresentation createAcceptEventAction(String name,
                                                   Point2D location)

Create an Accept Event Action.

Parameters:

name - Accept Event Action Name

location - Location

Returns:

INodePresentation Accept Event Action

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createAcceptTimeEventAction

abstract INodePresentation createAcceptTimeEventAction(String name,
                                                       Point2D location)

Create an Accept Time Event Action.

Parameters:

name - Accept Time Event Action Name

location - Location

Returns:

INodePresentation Accept Time Event Action

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createCallBehaviorAction

abstract INodePresentation createCallBehaviorAction(String name,
                                                    IActivityDiagram activity,
                                                    Point2D location)

Create a Call Behavior Action.

Parameters:

name - Call Behavior Action Name

activity - Activity diagram to reference

location - Location

Returns:

INodePresentation Call Behavior Action

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createPin

abstract INodePresentation createPin(String name,
                                     IClass base,
                                     boolean isInput,
                                     INodePresentation parentAction,
                                     Point2D location)

Create a Pin in a Parent Presentation.

Parameters:

name - Pin Name

base - Pin Base Type

isInput - if true, it is Input Pin, otherwise, it is Output Pin.

parent - Parent Presentation (Action/ Call behavior Action)

location - Location

Returns:

INodePresentation Pin

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createFlow

abstract ILinkPresentation createFlow(INodePresentation source,
                                      INodePresentation target)

Create a Control Flow.

Parameters:

end0 - the presentation connected to one side of the link

end1 - the presentation connected to one side of the link

Returns:

Control Flow Presentation.

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      ILLEGALMODELTYPE_ERROR_KEY - if the model type is illegal. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      NAME_DOUBLE_ERROR_KEY - An element with the same name already exists. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred. 
      READ_ONLY_KEY - if a read-only element is edited.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createObjectNode

abstract INodePresentation createObjectNode(String name,
                                            IClass base,
                                            Point2D location)

Create an Object Node.

Parameters:

name - Object Node Name

base - Object Node Base Type

location - Location

Returns:

INodePresentation Object Node

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createActivityParameterNode

abstract INodePresentation createActivityParameterNode(String name,
                                                       IClass base,
                                                       Point2D location)

Create an Activity Parameter Node.

Parameters:

name - Activity Parameter Node Name

base - Activity Parameter Node Base Type

location - Location

Returns:

INodePresentation Activity Parameter Node

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createProcess

abstract INodePresentation createProcess(String name,
                                         Point2D location)

Create a Process.

Parameters:

name - Process Name

location - Location

Returns:

INodePresentation Process

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createDecisionMergeNode

abstract INodePresentation createDecisionMergeNode(INodePresentation parent,
                                                   Point2D location)

Create a decision Merge Node.

Parameters:

parent - Parent Presentation

location - Location

Returns:

INodePresentation

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createForkNode

abstract INodePresentation createForkNode(INodePresentation parent,
                                          Point2D location,
                                          double width,
                                          double height)

Create a Fork Node.

Parameters:

parent - Parent Presentation

location - Location

width - Width

height - Height

Returns:

INodePresentation

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createForkNode

abstract INodePresentation createForkNode(INodePresentation parent,
                                          Point2D location)

Create a Fork Node.

Parameters:

parent - Parent Presentation

location - Location

Returns:

INodePresentation

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createJoinNode

abstract INodePresentation createJoinNode(INodePresentation parent,
                                          Point2D location,
                                          double width,
                                          double height)

Create a Join Node.

Parameters:

parent - Parent Presentation

location - Location

width - Width

height - Height

Returns:

INodePresentation

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createJoinNode

abstract INodePresentation createJoinNode(INodePresentation parent,
                                          Point2D location)

Create a Join Node.

Parameters:

parent - Parent Presentation

location - Location

Returns:

INodePresentation

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createConnector

abstract INodePresentation createConnector(String name,
                                           Point2D location)

Create a Connector.

Parameters:

name - Connector Name

location - Location

Returns:

INodePresentation Action

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      NO_TARGET_DIAGRAM_KEY - if target Diagram is not set. 
      ILLEGAL_DIAGRAM_TYPE_KEY - if the diagram type is illegal. 
      INVALID_DIAGRAM_ERROR_KEY - if a diagram of an element is not correct. 
      INVALID_PARENT_KEY - if the parent is invalid. 
      READ_ONLY_MESSAGE - if a read-only element is edited. 
      OUT_OF_CONTAINER_KEY - if the location is specified out of container. 
      LOCATION_ERROR_KEY - if a parent exists in the specified location. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred.

Values: 
      Error messages for exceptions.

Since:

6.8.0

createDependency

abstract ILinkPresentation createDependency(String name,
                                            INodePresentation client,
                                            INodePresentation supplier)

Create a Dependency.

Parameters:

name - Dependency Name

client - the presentation connected to client end of the link

supplier - the presentation connected to supplier end of the link

Returns:

Dependency Presentation.

Throws:

InvalidEditingException - InvalidEditingException occurs.

Keys: 
      PARAMETER_ERROR_KEY - if a parameter is not set properly. 
      ILLEGALMODELTYPE_ERROR_KEY - if the model type is illegal. 
      NO_NAME_ERROR_KEY - if the name is empty. 
      NAME_DOUBLE_ERROR_KEY - An element with the same name already exists. 
      BAD_TRANSACTION_KEY - Bad Transaction. 
      HAS_EXCEPTION_KEY - if an exception has occurred. 
      READ_ONLY_KEY - if a read-only element is edited.

Values: 
      Error messages for exceptions.

Since:

6.8.0